Mercedes E300 Brake Pad Sensor Parts
Showing 3 out of 3 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
Mercedes E300 brake pad sensor typically cost between $5.19 and $6.49.
The Mercedes E300 brake pad sensor is a component designed to monitor the thickness of your brake pads. It is an important safety feature that alerts you when the brake pads are wearing out and need replacement. The sensor is attached to the brake pad and sends a signal to the vehicle's onboard computer when the pad's thickness reaches a minimum level. This triggers a warning light on the dashboard, indicating that it's time to have the brake pads inspected and potentially replaced. By detecting worn brake pads, the sensor helps ensure optimal braking performance and avoids potential brake failure.
The Mercedes E300 typically has two brake pad sensors, one for the front brake pads and another for the rear brake pads. These sensors are designed to monitor the thickness of the brake pads and alert the driver when replacement is necessary.
Replacing Brake Pad Sensors On A Mercedes E300
Certainly! Here are the steps for replacing a brake pad sensor on a Mercedes E300:
- Gather the necessary tools and materials, including a new brake pad sensor, a socket wrench set, jack stands, and a jack.
- Park your vehicle on a level surface and engage the parking brake.
- Locate the wheel where the brake pad sensor needs to be replaced. Repeat the following steps for each wheel as needed.
- Loosen the lug nuts on the wheel using a socket wrench, but do not remove them yet.
- Use a jack to lift the vehicle off the ground and place jack stands under the frame to secure it.
- Fully remove the lug nuts and take off the wheel.
- Locate the brake caliper assembly. It is usually black or silver and positioned near the top of the brake rotor.
- Locate the brake pad sensor connected to the brake pads. The sensor is a small wire that is attached to the brake pad.
- Carefully disconnect the brake pad sensor from its connector by gently pulling it away.
- Inspect the sensor for any signs of damage or wear. If necessary, replace the entire sensor with a new one.
- Install the new brake pad sensor by plugging it into the connector until it clicks into place.
- Carefully reattach the brake caliper assembly, making sure it aligns properly with the brake rotor.
- Replace the wheel onto the hub and hand-tighten the lug nuts.
- Lower the vehicle from the jack stands using the jack, and remove the stands.
- Use a socket wrench to fully tighten the lug nuts in a diagonal pattern to ensure even tightening.
- Repeat steps 3-15 for the remaining wheels if needed.
- Start the engine and pump the brake pedal a few times to ensure proper engagement of the new brake pad sensor.
- Test the brakes by driving the vehicle at a low speed and gently applying the brakes. Make sure they are functioning correctly.
- Check for any signs of brake pad wear or sensor malfunction regularly to ensure safe driving.
Please note that these steps are a general guideline, and it is always recommended to consult your vehicle's specific user manual or seek professional assistance for accurate instructions tailored to your model.
Top Mercedes E300 Brake Pad Sensor Brands for Sale
Bowa Brake Pads Sensor:
Bowa is a reputable manufacturer known for producing high-quality brake pad sensors. They focus on precision and durability, ensuring that their products meet the stringent standards set by Mercedes-Benz. Bowa brake pad sensors are designed with advanced technology, providing accurate readings to effectively monitor the condition of the brake pads. Their commitment to quality control makes them a trusted choice for Mercedes E300 brake pad sensor owners looking for reliable brake pad sensors.
Pagid Brake Pads Sensor:
Pagid is another well-known manufacturer that produces brake pad sensors compatible with the Mercedes E300. As an original equipment supplier for various automotive brands, including Mercedes-Benz, Pagid offers brake pad sensors that meet or exceed the vehicle manufacturer's specifications. With a strong emphasis on performance and safety, Pagid ensures that their brake pad sensors deliver precise measurements and reliable functionality. The brand's reputation for quality and high standards makes them a reliable option for Mercedes E300 brake pad sensor owners seeking exceptional brake pad sensors.
Sadeca Brake Pads Sensor:
Sadeca is a respected manufacturer that specializes in providing brake system components, including brake pad sensors, for a range of vehicles, including the Mercedes E300. Their brake pad sensors are crafted utilizing advanced engineering techniques, attention to detail, and strict quality control measures. Sadeca's sensors are designed to accurately detect the wear level of brake pads, ensuring optimal braking performance and safety. Mercedes-Benz's recognition of Sadeca as a trusted supplier reflects their commitment to delivering reliable and high-quality brake pad sensors for their vehicles.
It is important to note that while Genuine branded parts, manufactured by the chosen auto parts manufacturers, are the most expensive option, they bear the vehicle manufacturer's name and are held to exceptionally high quality standards. Therefore, investing in Genuine branded brake pad sensors ensures that Mercedes E300 owners receive parts that not only meet the vehicle manufacturer's specifications but also provide the best original equipment quality.
Find Great Deals on Mercedes E300 Brake Pad Sensor
At AutohausAZ, customers can experience a seamless shopping experience when searching for a brake pad sensor for their Mercedes E300. This renowned online retailer offers a wide selection of high-quality products specifically designed for Mercedes vehicles. With an extensive inventory, customers are bound to find the perfect brake pad sensor that meets their specific needs.
One major advantage of shopping at AutohausAZ is the accessibility and convenience it provides. Customers can browse through their website from the comfort of their own homes, eliminating the need to visit physical stores and potentially waste time searching for the right product. By offering a user-friendly interface and comprehensive product descriptions, AutohausAZ ensures that customers can easily find what they are looking for and make informed purchasing decisions.
Another notable advantage is the reliability and trustworthiness of AutohausAZ. They source their products from reputable manufacturers, ensuring top-notch quality and performance. This gives customers peace of mind knowing that they are purchasing a brake pad sensor that will seamlessly integrate with their Mercedes E300 and provide optimal functionality.
Additionally, AutohausAZ prides itself on its commitment to customer satisfaction. They understand the importance of excellent customer service and strive to provide prompt assistance to any inquiries or concerns. Their knowledgeable team is readily available to address questions regarding compatibility, installation, or any other issues that may arise. This ensures that customers can shop confidently, knowing that they have the support they need throughout their entire shopping experience.
In conclusion, AutohausAZ offers several advantages when it comes to shopping for a brake pad sensor for the Mercedes E300. From the convenience of online browsing to the reliability of their products and dedicated customer service, AutohausAZ provides a superior shopping experience for Mercedes E300 owners in need of a brake pad sensor.
