Mercedes E320 Brake Pad Sensor Parts
Showing 7 out of 7 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
The average cost of a Mercedes E320 brake pad sensor is between $2.19 and $18.39.
The Mercedes E320 brake pad sensor is a component of the braking system in the Mercedes E320 vehicle. It is designed to monitor the wear of the brake pads. The sensor is physically connected to the brake pads and when the pads become worn down to a certain level, the sensor sends a signal to the vehicle's onboard computer system. This signal triggers a warning light on the dashboard to alert the driver that the brake pads need to be replaced. The purpose of the brake pad sensor is to ensure that the driver is aware of the condition of the brake pads so they can be replaced in a timely manner to maintain optimal braking performance and safety.
The Mercedes E320 typically has two brake pad sensors, one for the front brakes and one for the rear brakes.
Replacing Brake Pad Sensors On A Mercedes E320
Certainly! Here are the steps to replace a brake pad sensor on a Mercedes E320:
- Gather the necessary tools and materials: You will need a new brake pad sensor (specifically designed for the Mercedes E320), a socket set, a jack, jack stands, a lug wrench, and safety glasses.
- Ensure safety: Park your vehicle on a flat surface and engage the parking brake. Put on your safety glasses before proceeding.
- Lift the vehicle: Use the jack to lift the front or rear of the vehicle, depending on which brake pad sensor you are replacing. Place jack stands underneath the vehicle to secure it.
- Remove the wheel: Use a lug wrench to loosen the lug nuts, but do not remove them completely yet. Once loosened, lift the vehicle higher with the jack and remove the lug nuts and the wheel.
- Locate the brake pad sensor: Look for the brake pad sensor, which is a small wire attached to the brake pad wear indicator. It is usually located near the brake caliper.
- Disconnect the sensor: Gently unplug the electrical connector from the sensor. Be careful not to damage the connector or wiring.
- Remove the old sensor: Depending on the design, the sensor may be clipped or bolted onto the brake pad. Release any clips or bolts securing the sensor and carefully remove it.
- Install the new sensor: Take the new brake pad sensor and position it in place. If it has a clip, secure it onto the brake pad. If it has a bolt, fasten it using appropriate torque specifications.
- Reconnect the electrical connector: Plug the electrical connector into the corresponding socket on the new brake pad sensor. Ensure a secure connection.
- Reinstall the wheel: Lift the wheel back onto the hub and hand-tighten the lug nuts. Lower the vehicle with the jack until the wheel touches the ground. Use the lug wrench to tighten the lug nuts in a star pattern.
- Lower the vehicle completely: Carefully remove the jack stands and lower the vehicle until all four wheels are on the ground.
- Test the sensor: Start the engine and check for any warning lights on the dashboard related to the brake system. If everything looks good, perform a few gentle brake applications to test the new sensor.
Remember to consult the vehicle's manual or seek professional assistance if you encounter any difficulties during the process or if you are unsure about any steps.
Top Mercedes E320 Brake Pad Sensor Brands for Sale
Bowa:
Bowa is a reputable brake pad sensor manufacturer that produces high-quality components. They are known for their precision engineering and attention to detail in creating brake pad sensors for various vehicles, including the Mercedes E320. Bowa brake pad sensors are designed to meet or exceed the original equipment specifications, ensuring optimal performance and reliability. With a focus on quality and durability, Bowa sensors provide an accurate indication of brake pad wear, allowing for timely maintenance and replacement.
Genuine Mercedes:
As the name suggests, Genuine Mercedes parts are manufactured exclusively by the auto parts manufacturers chosen by Mercedes-Benz. These parts are held to exceptionally high quality standards set by the automaker, ensuring that they match the original equipment used in the vehicle. Genuine Mercedes brake pad sensors are crafted with precision and are designed to seamlessly integrate into the braking system of the E320. By choosing Genuine Mercedes parts, owners can have the confidence that they are installing components that meet the manufacturer's stringent standards and will deliver optimal performance.
Pagid:
Pagid, a well-respected brand in the automotive industry, offers a range of brake pad sensors that are suitable for the Mercedes E320. Known for their commitment to quality, Pagid utilizes advanced manufacturing techniques and materials to produce brake pad sensors that meet or exceed the original equipment specifications. Pagid sensors are designed to accurately measure brake pad wear, providing drivers with the necessary information for timely maintenance. With a reputation for reliability and consistent performance, Pagid brake pad sensors are a trusted choice for Mercedes-Benz owners who prioritize safety and longevity.
In summary, Bowa, Genuine Mercedes, and Pagid are all reputable manufacturers of brake pad sensors for the Mercedes E320. While Genuine Mercedes parts are specifically produced by the auto parts manufacturers designated by Mercedes-Benz, Bowa and Pagid also offer high-quality alternatives that meet the same standards. Regardless of the brand chosen, all three options provide reliable brake pad sensor solutions that ensure proper brake maintenance and optimal performance for the E320.
Find Great Deals on Mercedes E320 Brake Pad Sensor
When looking for a reliable source to purchase a brake pad sensor for your Mercedes E320, AutohausAZ has a range of advantages that make it an excellent choice. Firstly, they offer a wide selection of high-quality brake pad sensors specifically designed for your vehicle model. This means you can easily find the perfect fit and ensure optimal braking performance.
In addition to their extensive product range, AutohausAZ provides exceptional customer service. Their knowledgeable staff is ready to assist you with any inquiries or concerns you may have, ensuring a smooth and hassle-free shopping experience. Their commitment to customer satisfaction is unmatched, as they strive to exceed your expectations every step of the way.
When it comes to pricing, AutohausAZ offers competitive rates for their brake pad sensors. By providing access to authentic, reliable parts at affordable prices, they make it convenient for Mercedes E320 owners to maintain their vehicles without breaking the bank. This affordability allows you to prioritize safety and reliability without compromising on quality.
Furthermore, AutohausAZ understands the importance of efficiency. They are dedicated to promptly processing and shipping your orders, ensuring that you receive your brake pad sensor in a timely manner. This saves you valuable time and enables you to quickly get your vehicle back on the road with confidence.
Finally, by choosing AutohausAZ for your Mercedes E320 brake pad sensor needs, you gain access to a trusted source that has been serving customers for years. With their strong reputation and commitment to excellence, you can have peace of mind knowing that you are purchasing a genuine, dependable product.
In summary, AutohausAZ stands out as an advantageous choice when it comes to shopping for a brake pad sensor for your Mercedes E320. Their wide selection, exceptional customer service, competitive pricing, efficient shipping, and trusted reputation make them the ideal destination for all your automotive needs.
