Mercedes E500 Brake Pad Sensor Parts
Showing 12 out of 12 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
The average cost of a Mercedes E500 brake pad sensor is between $2.19 and $18.39.
The Mercedes E500 brake pad sensor is a component of the vehicle's braking system. It is designed to monitor the thickness of the brake pads. The sensor is attached to the brake pad and when the pad wears down to a certain level, it triggers a warning light on the dashboard. This alert serves as a reminder for the driver to have the brake pads replaced, ensuring optimal braking performance and safety.
The Mercedes E500 typically has two brake pad wear sensors, one for the front brake pads and one for the rear brake pads. These sensors are part of the vehicle's braking system and help to monitor the condition of the brake pads.
Replacing Brake Pad Sensors On A Mercedes E500
- Gather the necessary tools and materials: brake pads, brake pad sensor, jack, jack stands, lug wrench, wheel chocks, pliers, wire cutters, and a socket set.
- Ensure safety: Park the vehicle on a flat surface and engage the parking brake. Place wheel chocks behind the tires to prevent rolling.
- Lift the vehicle: Locate the designated lifting points under the vehicle and use a jack to lift the front or rear, depending on which brake pad sensor needs replacement. Secure the car on jack stands for added stability.
- Remove the wheel: Use the lug wrench to loosen the lug nuts, but do not completely remove them yet. Once loose, lift the wheel off the hub and set it aside.
- Locate the brake pad sensor: The brake pad sensor is a small wire located near the brake caliper. It is connected to the brake pad itself and sends a warning signal to alert you when the brake pads are worn out.
- Disconnect the sensor: Use pliers or wire cutters to carefully disconnect the wire connected to the brake pad sensor. Take note of how it is attached as you will need to reconnect the new sensor in the same manner.
- Remove the old sensor: Once the wire is disconnected, gently pull the brake pad sensor out of its mounting location. Take care not to damage the surrounding components.
- Install the new sensor: Insert the new brake pad sensor into the same location where you removed the old one. Ensure it is securely seated and aligned properly.
- Reconnect the wire: Attach the wire of the new sensor to the corresponding connection point, following the same routing as the previous sensor. Make sure it is secure and properly connected.
- Replace the wheel: Lift the wheel back onto the hub and hand-tighten the lug nuts initially. Lower the vehicle from the jack stands and then use a lug wrench to fully tighten the lug nuts in a crisscross pattern.
- Repeat the process: If necessary, perform the above steps on the remaining wheels that require brake pad sensor replacement.
- Test the brakes: Start the vehicle and test the brake pedal to ensure proper operation. Check for any warning lights on the dashboard related to the brake system.
- Note: It's always recommended to consult the vehicle's owner manual or seek professional assistance if you are unsure or unfamiliar with this process.
Top Mercedes E500 Brake Pad Sensor Brands for Sale
Bowa Brake Pad Sensors:
Bowa is a well-known manufacturer of brake pad sensors for various automotive brands, including Mercedes. They are known for their commitment to producing high-quality and durable components. Bowa brake pad sensors are designed to meet or exceed the original equipment specifications set by Mercedes-Benz. Their sensors are built with precision and undergo rigorous testing to ensure optimal performance and accurate readings. While Bowa brake pad sensors may not carry the Genuine brand, they are a reliable aftermarket alternative that offers excellent value and quality.
Genuine Brake Pad Sensors:
Genuine branded parts are produced by the auto parts manufacturers chosen by the vehicle manufacturer themselves. These manufacturers are held to strict quality standards by the vehicle manufacturer, ensuring that the parts meet the highest standards of quality and performance. Genuine brake pad sensors for the Mercedes E500 are manufactured with the same specifications as the original equipment sensors installed in the vehicle during production. These sensors are designed to provide precise measurements of brake pad wear and offer optimal compatibility and performance. While Genuine parts tend to be more expensive due to their association with the vehicle manufacturer's brand, they are an assurance of top-notch quality and reliability.
Pagid Brake Pad Sensors:
Pagid is a reputable aftermarket manufacturer of brake pad sensors, offering a wide range of high-quality components for various vehicle makes and models, including Mercedes. Pagid brake pad sensors are engineered to meet or exceed OEM specifications and are well-regarded for their performance and longevity. With a focus on durability and accuracy, Pagid sensors deliver reliable readings and help ensure the safe operation of the braking system. Although not carrying the Genuine branding, Pagid brake pad sensors provide an excellent alternative option that combines quality and affordability.
In conclusion, all three manufacturers - Bowa, Genuine, and Pagid - offer reliable options for brake pad sensors for the Mercedes E500. Bowa and Pagid provide aftermarket alternatives that deliver quality and value, while Genuine parts, being directly manufactured by the vehicle manufacturer's chosen suppliers, guarantee excellent performance and are synonymous with original equipment quality. The choice ultimately depends on individual preferences and budget considerations.
Find Great Deals on Mercedes E500 Brake Pad Sensor
AutohausAZ offers a convenient and seamless shopping experience for Mercedes E500 brake pad sensors. With an extensive selection of high-quality products, customers can easily find the perfect brake pad sensor for their vehicle.
One advantage of shopping at AutohausAZ is the comprehensive product information provided. Detailed descriptions, specifications, and compatibility information are readily available, ensuring that customers can make informed purchasing decisions. This saves valuable time and eliminates the need for unnecessary guesswork.
Another advantage is the reliable and efficient ordering process. Customers can quickly navigate through the website, locate the desired brake pad sensor, and effortlessly add it to their cart. The streamlined checkout process ensures a hassle-free transaction, without any unnecessary complications.
AutohausAZ also prides itself on its commitment to customer satisfaction. Their dedicated customer service team is always ready to assist shoppers with any inquiries or concerns they may have. Whether it's providing expert advice or troubleshooting issues, the team is dedicated to ensuring a positive experience for every customer.
In addition to a user-friendly interface and excellent customer service, AutohausAZ offers competitive prices for Mercedes E500 brake pad sensors. By sourcing directly from trusted manufacturers, they can provide customers with top-quality products at affordable prices. This is especially advantageous for those who want to maintain the performance and safety of their vehicles without breaking the bank.
Finally, AutohausAZ understands the importance of prompt and secure shipping. Customers can rely on their efficient shipping methods to receive their brake pad sensors in a timely manner. Ensuring the safe delivery of products is of utmost importance to AutohausAZ, as they strive to exceed customer expectations.
Overall, shopping at AutohausAZ for Mercedes E500 brake pad sensors provides numerous advantages. From comprehensive product information to outstanding customer support, customers can enjoy a seamless and satisfying shopping experience. With competitive pricing and reliable shipping, AutohausAZ proves to be a trusted source for all brake pad sensor needs.
