Porsche 911 Tail Light Parts
Showing 20 out of 43 part(s) found in our catalog.
Brand
Keyword
Category
Select category below to view parts.
Mon-Fri 8-4 MST/PST (Arizona Time)
The average price of a Porsche 911 tail light is between $1.09 and $1171.99.
How Do I Replace A Porsche 911 Tail Light?
Changing out a Porsche 911 tail light is something you can handle with just a few tools. Start by disconnecting your car’s battery for safety. Inside the trunk or hatch area, look for the panel behind the tail light; you might need to remove some trim or a couple of screws to reach it. Once you can see the back of the tail light, unscrew the mounting bolts and gently pull the assembly out. Disconnect the wiring harness, then hook up your new light. Slide the assembly back in, tighten everything down, and plug the wiring back in. Before you put the trim back, have someone step on the brake or turn on the lights so you can make sure everything works. If it all checks out, reassemble the panels and you’re good to go.
Why Did My Porsche 911 Tail Light Stop Working?
When a Porsche 911 tail light stops working, the most likely culprit is a burned-out bulb. If swapping in a new bulb doesn’t do the trick, check your fuses—each model’s fuse box will have a diagram to help you find the right one. If that doesn’t solve it, wiring could be at fault, especially on older cars where corrosion can sneak in. Sometimes, newer 911s use control modules for the lights and these can create issues if they fail. If checking the bulb and fuse doesn’t fix it, it may be time to look for loose connections, or get a mechanic to take a closer look.
What Are The Most Common Tail Light Issues On A Porsche 911?
The typical trouble spots for a Porsche 911 tail light are water or condensation inside the lens, unpredictable flickering, or total failure due to wiring. Moisture is often the result of an old, brittle seal or a crack—this can cause the inside of the lens to fog up. If your light flickers or goes out now and then, you might be dealing with loose wiring or a failing bulb. Some modern 911s with LED setups can have electronic glitches, causing odd warning lights or lights that won’t turn off. Keeping an eye out for these issues and sorting them quickly helps keep your lights shining bright.
Can I Upgrade To LED Porsche 911 Tail Lights?
LED Porsche 911 tail lights are a big hit for good reason. They’re brighter, turn on faster, and look sharp. On many 911s, you can swap out your old light for an LED version fairly easily—often it’s just a plug-and-play job. Some models might need extra parts like resistors to help the lights work correctly and avoid fast blinking or dashboard errors. Always double-check compatibility before buying. If you run into trouble with the swap, a pro who knows Porsches can help get everything hooked up right.
How Do I Fix Condensation Or Water In My Porsche 911 Tail Light?
If you notice beads of water or fog inside your Porsche 911 tail light, there’s likely a leaky seal or a hairline crack somewhere. The best fix is to pull out the tail light, check the seals and edges for wear or damage, and replace the gasket if it’s worn. Small cracks can sometimes be patched with a dab of clear silicone. Make sure the assembly is totally dry before you put it back together—a sunny spot or gentle hair dryer can help. Keeping water out is key for avoiding future issues with corroded parts or early bulb failure.
Looking For An Affordable Porsche 911 Tail Light?
If you need a new tail light for your 911, AutohausAZ has you covered. You’ll find great prices and quick shipping, so you won’t have to wait around to get your car back in shape. Not sure if it’ll fit your model? Their easy returns make it stress-free to try. Count on them to help you keep your Porsche looking and driving its best without busting your budget.
