Porsche 914 Tail Light Bulb Parts
Showing 7 out of 7 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
Porsche 914 tail light bulb typically cost between $1.49 and $2.69.
What Bulb Type Fits A Porsche 914 Tail Light Assembly?
If you're looking for the right bulb for the Porsche 914 tail light assembly, most models use a standard 1157 dual-filament bulb. This single bulb takes care of both your running lights and your brake lights, thanks to its two-filament design. To double-check, just pull out your old bulb and look for a number stamped on the base. It's a good idea to match the wattage and voltage, since using the wrong type can cause wiring issues or overheating. When shopping, stick with automotive bulbs that are made to fit snugly and safely inside your car’s tail light housing.
How Do I Replace The Porsche 914 Tail Light Bulb?
Changing the Porsche 914 tail light bulb is a quick job as long as you take care with the older plastic parts. Remove the two screws holding the tail light lens, then gently lift the lens away. You’ll see the bulb inside—just push it down slightly and twist counterclockwise to pull it out. Pop in the new bulb (lines up the pins, push and turn clockwise), then put the lens and screws back on. Always check your lights before calling it done, and handle the plastic with care since age can make it fragile.
Which LED Options Work For Porsche 914 Tail Light Bulb?
If you're thinking about using LEDs instead of regular bulbs in your Porsche 914 tail light, look for plug-and-play 1157-style LEDs. The best options are designed to fit right in without needing to change any wiring. Choose bulbs made for 12-volt systems and check that their brightness (lumens) matches what you need for safety. Some budget LEDs can cause issues like “hyperflash” or error messages, so it pays to pick a reputable brand—or grab a resistor kit just in case. Since these cars have older lens designs, go with wide-angle LEDs for the most even and factory-style light spread.
Why Is My Porsche 914 Tail Light Bulb Not Working Even After Replacement?
If a brand new Porsche 914 tail light bulb still isn't lighting up, don't worry—there are a few things you can check. First, inspect the socket for any signs of corrosion or dirt, since these can block the electrical connection. Check that the metal contacts are making good contact and aren't bent out of shape. Use a test light or multimeter to see if power is reaching the socket. It's also worth checking the ground connection and the tail light fuse in your fuse box. Usually, a careful look at each part of the circuit will reveal the cause.
How Do I Prevent Moisture In Porsche 914 Tail Light Bulb Housing?
Keeping the inside of your Porsche 914 tail light bulb housing dry is key to avoiding rust and bulb problems. Check the rubber gasket around the lens for cracks or stiffness—if the seal is bad, replace it. Tighten the lens screws evenly but not too hard, or the seal could get crushed and let water in. Every so often, pop the lens off and look for any signs of water or cloudiness, and clear out any debris hiding inside. A thin layer of silicone grease on the gasket edges can help keep water out, letting your lights and wiring last longer.
Looking For A Porsche 914 Tail Light Bulb?
If you need a new Porsche 914 tail light bulb, AutohausAZ has you covered. We keep prices low, ship orders fast, and make returns easy if you ever need them. Find the right bulb for your classic 914 and get back on the road with no hassle.
