Porsche 944 Tail Light Parts
Showing 3 out of 3 part(s) found in our catalog.
Brand
Keyword
Category
Select category below to view parts.
Mon-Fri 8-4 MST/PST (Arizona Time)
The average cost of a Porsche 944 tail light is between $1.99 and $2.49.
How Do I Replace The Tail Light Assembly On A Porsche 944?
Start by opening the trunk and pulling back the carpeting so you can access the tail light area from inside. Find the wiring harness connected to the assembly and unplug it carefully. Next, use a socket wrench to remove the mounting nuts or bolts holding the tail light in place—set them aside somewhere safe. With the hardware off, gently work the old tail light assembly free from the body. To install the new one, line it up just like the old unit, tighten everything back down, reconnect the wiring, and double-check that all the lights function before putting the trunk panels and carpet back. If any rubber gaskets or seals look tired, swap them out now to help avoid leaks down the line.
What Causes Moisture Or Fogging Inside The Tail Light?
Moisture or fog forming inside your Porsche 944 tail light usually comes down to cracked lenses, worn-out seals, or imperfect fitment against the body. Even a small gap can let water inside during a heavy rain or a car wash. Many owners reseal the edges of the assembly with automotive silicone or buy replacement gaskets. If you notice condensation, pulling the assembly and letting it air out before fixing the leaks helps clear things up. If left unchecked, moisture can lead to corrosion or electrical issues, so it’s worth addressing as soon as you spot it.
Which Bulb Types Are Compatible With The Porsche 944 Tail Light?
Most Porsche 944 tail light assemblies use bayonet-type 1157 or 1156 bulbs for the brake, tail, and indicator functions. You can swap in modern LED versions for more brightness and efficiency, but you might need resistors to stop rapid blinking or dash errors. Double-check the owner’s manual for bulb specs so you get the right fit and wattage. It’s always smart to test the lights as you reinstall everything to make sure all features are working as they should.
How Can I Upgrade To A Brighter Or LED Tail Light?
Switching your Porsche 944 tail light over to LED is a straightforward project. Start by picking up LED bulbs that will fit your current sockets—they’re often sold as direct-replacement types. Some cars need an extra resistor plug to keep the blinkers flashing at a normal speed. Swapping to high-quality bulbs pays off in brighter, crisper light and longer life. A quick test after installation lets you catch any issues early, so you’re never left in the dark. Just make sure what you buy works with your car’s electrical system to avoid hassle.
Why Do My Tail Lights Stop Working Even With Good Bulbs?
When your Porsche 944 tail light gives you trouble but the bulbs check out, there’s usually an issue with the wiring, the socket, or the fuses. Sometimes corrosion builds up where the bulb meets the socket or in the wiring harness, which can stop current from getting through. Check for blown fuses in the fuse box and inspect the wiring for any obvious damage. If you spot greenish or crusty spots, clean them off or replace the part. Bad grounds are also a common culprit, so make sure all your connections are tight and clean.
Where Can You Find Affordable Porsche 944 Tail Lights With Easy Returns?
AutohausAZ is a great place to pick up a Porsche 944 tail light without breaking the bank. They’re known for solid discounts and quick shipping to get you back on track fast. If you run into any issues or change your mind, their return policy is simple and hassle-free. So, you can shop for your replacement tail light with peace of mind, knowing you’re covered if you need to make a change.
