Porsche 944 Tail Light Bulb Parts
Showing 11 out of 11 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
Porsche 944 tail light bulb typically cost between $1.19 and $2.49.
What Type of Bulb Fits the Porsche 944 Tail Light?
If you’re looking to replace the Porsche 944 tail light bulb, most 944 models from the 1980s use a standard 1157 dual-filament bulb. That said, there can be some variation, so it’s worth double-checking your specific year and model. The best way to be sure is to refer to your owner’s manual or pull out the old bulb and check the number stamped on its base. Make sure the bulb you pick is rated specifically for taillights to get the right fit and brightness for your car.
How Do I Replace the Porsche 944 Tail Light Bulb?
Swapping out a Porsche 944 tail light bulb is a pretty simple job. Start by opening the rear hatch and removing the carpeted panel covering the tail light area. Next, locate the bulb holder, then twist it counterclockwise and gently pull it free. To take out the old bulb, push it in slightly and twist it to the left. Pop in the new bulb, reverse the steps, and make sure it’s firmly in place. Before buttoning everything back up, turn on your lights to confirm the bulb is working as it should.
Why Is the Tail Light Still Not Working After Bulb Replacement?
If you’ve swapped out your Porsche 944 tail light bulb and it’s still not lighting up, there are a few things to check. Look for corrosion or dirt inside the socket, as this can block the electrical connection. Next, inspect the wiring and fuses—sometimes a blown fuse or broken wire is to blame. In some cases, the tail light circuit board can develop cracks or corrosion that stop power from reaching the bulb. Running through these checks usually helps you find what’s going wrong if a new bulb alone doesn’t do the trick.
Can I Use LED Bulbs in My Porsche 944 Tail Lights?
Plenty of Porsche 944 owners swap out their regular bulbs for LED versions. LEDs are brighter and often last much longer. When picking an LED, go for bulbs labeled “CANBUS” or “error-free”—these help prevent dash warnings. Since the 944 wasn’t originally built for LEDs, you may need resistors to prevent fast blinking or bulb-out messages. Always match the bulb fit and wattage carefully, so you don’t run into problems with melting or electrical faults. If installed properly, LEDs can be a hassle-free upgrade for better visibility and style.
How Do I Prevent Water or Moisture Damage to the Tail Light Bulb?
Water inside your tail light housing can quickly kill a Porsche 944 tail light bulb. Inspect the rubber gasket and lens for any signs of cracks or failed seals. Replace worn weatherstripping or gaskets if necessary. When you put the bulb holder back in, make sure it’s seated snugly. Smearing a little dielectric grease around the bulb’s base helps block moisture and prevent corrosion. By keeping your tail lights sealed and dry, you’ll extend the life of your bulbs and keep your signals shining bright for everyone behind you.
Looking for an Affordable Porsche 944 Tail Light Bulb?
At AutohausAZ, we make it easy to find the right Porsche 944 tail light bulb without overspending. Our prices stay competitive, and we keep shipping quick, so your car isn’t off the road for long. Plus, if a part doesn’t fit, our hassle-free return policy’s got you covered. Shopping with us is a simple, budget-friendly way to keep your Porsche’s tail lights in top shape.
