Porsche Macan Brake Pad Sensor Parts
Showing 18 out of 18 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
Based on industry averages you can expect to pay between $5.19 and $52.99 for a Porsche Macan brake pad sensor.
The Porsche Macan brake pad sensor is a component designed to monitor the condition of the brake pads in your vehicle. It is typically located on the brake caliper and consists of a small electronic sensor wire. The primary function of the brake pad sensor is to detect the thickness of the brake pads. As the brake pads wear down over time, the sensor will eventually make contact with the brake rotor. This triggers a warning signal or light on the dashboard, indicating that it is time to replace the brake pads. Essentially, the brake pad sensor serves as a safety feature, alerting you to maintain the proper functionality of your braking system.
The Porsche Macan typically has two brake pad sensors, one for the front brakes and another for the rear brakes. These sensors help monitor the thickness of the brake pads and alert the driver when they need to be replaced.
Replacing Brake Pad Sensors On A Porsche Macan
Certainly! Here is a step-by-step guide for replacing a brake pad sensor on a Porsche Macan:
- Park the vehicle on a level surface and engage the parking brake. Ensure the engine is turned off.
- Locate the brake pad sensor connection. This is usually located near the brake caliper or brake pad assembly. Follow the wire from the brake pad to find the connection point.
- Disconnect the electrical connection. This can be done by squeezing or pushing the plastic connector to release it from the sensor.
- Inspect the sensor for any signs of damage or wear. If the sensor is visibly damaged, it should be replaced.
- Remove the old sensor. Depending on the type of sensor, it may be attached with clips, bolts, or adhesive. Refer to your vehicle's manual or specific instructions for the correct method.
- Clean the area where the sensor was installed. Use a clean cloth or a small brush to remove any dirt or debris. Ensure the area is dry before proceeding.
- Install the new brake pad sensor. Align the sensor in the correct position, making sure it sits flush against the brake pad. Secure it using the appropriate method (clips, bolts, or adhesive) as per the manufacturer's instructions.
- Reconnect the electrical connector. Ensure it is securely plugged into the sensor. You may need to push or click it into place.
- Double-check the sensor installation. Verify that everything is properly connected and secured. Take a moment to inspect the surrounding brake components for any signs of damage or wear.
- Once you are satisfied with the installation, carefully release the parking brake.
It's important to note that this guide provides a general outline for replacing a brake pad sensor on a Porsche Macan. It's always recommended to refer to your vehicle's manual or seek assistance from a qualified mechanic for specific instructions and guidelines.
Top Porsche Macan Brake Pad Sensor Brands for Sale
Sebro:
Sebro is a well-established manufacturer of brake pad sensors for the Porsche Macan. They are known for producing high-quality sensors that meet or exceed original equipment standards. With a strong focus on precision engineering, Sebro ensures that their sensors provide accurate readings and reliable performance. Their commitment to quality has made them a trusted choice for many vehicle manufacturers, including Porsche. While not branded under the Porsche name, Porsche Macan brake pad sensor Sebro brake pad sensors are a cost-effective option that still delivers excellent performance.
ATE:
ATE is another reputable manufacturer of brake pad sensors for the Porsche Macan. They have a long history in the automotive industry and are recognized for their expertise in braking systems. ATE produces sensors that are designed to meet the stringent requirements set by vehicle manufacturers, ensuring optimal performance and safety. Their brake pad sensors are known for their durability and reliability, making them a trusted choice among car enthusiasts and professional technicians. While not bearing the Porsche branding, Porsche Macan brake pad sensor ATE sensors offer a reliable alternative to Genuine parts.
Pex:
Pex is a renowned manufacturer of brake system components, including brake pad sensors. They have been supplying the automotive aftermarket industry with high-quality products for several decades. Pex brake pad sensors are manufactured to meet or exceed original equipment specifications, ensuring compatibility and reliable function. Their sensors are known for their accuracy in detecting brake pad wear, providing timely warnings to drivers when replacement is necessary. Although not branded as Genuine parts, Porsche Macan brake pad sensor Pex offers a cost-effective option without compromising on quality or performance.
It's worth noting that while Genuine branded parts are manufactured exclusively by the auto parts manufacturers chosen by the vehicle manufacturer, Sebro, ATE, and Pex are trusted manufacturers that produce reliable brake pad sensors suitable for the Porsche Macan. These alternatives can provide comparable performance and quality at a more affordable price point.
Find Great Deals on Porsche Macan Brake Pad Sensor
When shopping for a Porsche Macan brake pad sensor, it is advantageous to consider AutohausAZ. This reputable online retailer offers a wide selection of high-quality sensors that are specifically designed for your vehicle's braking system. By offering an array of options, AutohausAZ ensures that you can easily find the sensor that best fits your needs.
One advantage of choosing AutohausAZ is their dedication to providing customers with reliable products. They carefully curate their inventory, sourcing from trusted manufacturers to guarantee the performance and durability of each sensor. With AutohausAZ, you can have peace of mind knowing that you are investing in a brake pad sensor that will effectively monitor the condition of your brake pads.
In addition, AutohausAZ's extensive experience in the industry allows them to offer competitive pricing on their brake pad sensors. By shopping with them, you can potentially save money without compromising on quality. This affordability ensures that maintaining and servicing your Porsche Macan's brake system doesn't break the bank.
Furthermore, AutohausAZ understands the importance of convenience in the shopping experience. They provide detailed product descriptions and specifications, helping you make an informed decision before purchasing. Their user-friendly website design offers easy navigation, ensuring a seamless browsing experience as you explore the available options. If you have any specific questions or concerns, their knowledgeable customer service team is readily available to assist you.
Lastly, AutohausAZ's commitment to customer satisfaction sets them apart. They strive to exceed expectations, not only by providing top-notch products but also through their efficient shipping and reliable order fulfillment processes. This ensures that your new brake pad sensor will arrive promptly and in perfect condition.
In conclusion, AutohausAZ offers several advantages when it comes to shopping for a Porsche Macan brake pad sensor. Their commitment to quality, competitive pricing, convenient online experience, and focus on customer satisfaction make them a reliable choice for all your automotive needs.
