Volvo 960 ABS Wheel Speed Sensor Parts

Try another search, as we didn't find any parts matching your query.

Narrow Down Your Search By...
Filter search results specific to your vehicle.
Volvo 960
ABS Wheel Speed Sensor
Can't Find What You Need?
Mon-Fri 8-4 MST/PST (Arizona Time)
Contact Us

We didn't find any parts matching your search query.

The Volvo 960 ABS wheel speed sensor is a component of the anti-lock braking system (ABS) in Volvo 960 vehicles. It is responsible for monitoring the rotational speed of each wheel. The sensor detects any variations in wheel speed and sends this information to the ABS control module. This data allows the ABS system to determine if a wheel is locking up during braking or if there are any irregularities in wheel speed. Based on this information, the ABS system can modulate the brake pressure to specific wheels to prevent skidding and improve overall vehicle stability and control during braking maneuvers.

A Volvo 960 typically has four ABS wheel speed sensors, one for each wheel.

The lifespan of a Volvo 960 ABS wheel speed sensor can vary depending on various factors such as driving conditions, maintenance, and quality of the part. However, on average, these sensors can last anywhere between 50,000 to 100,000 miles. It's important to regularly inspect and maintain the sensors to ensure proper functionality and longevity.

Replacing ABS Wheel Speed Sensors On A Volvo 960

To replace the ABS wheel speed sensor on a Volvo 960, follow these steps:

  1. Ensure safety: Park the vehicle on a flat surface and engage the parking brake. Turn off the engine and let it cool down.
  2. Locate the faulty sensor: The ABS wheel speed sensor is typically located on the wheel hub assembly behind the brake rotor.
  3. Remove the tire: Use a lug wrench to loosen the wheel nuts, raise the vehicle using a jack, and safely support it with jack stands. Remove the wheel to access the sensor.
  4. Disconnect the sensor: Locate the electrical connector attached to the sensor. Depending on the model year, you may need to remove any retaining clips or screws before disconnecting the connector.
  5. Remove the mounting bolt: Using an appropriate tool like a socket wrench or a Torx bit (depending on the specific sensor), remove the mounting bolt that secures the sensor to the wheel hub assembly.
  6. Remove the sensor: Carefully pull the sensor out of the hub assembly while twisting it gently to break any corrosion or sealant bond. Be cautious not to damage the sensor or its harness during removal.
  7. Clean the mounting area: Thoroughly clean the mounting area on the wheel hub assembly using a wire brush or a suitable cleaner to ensure proper installation of the new sensor.
  8. Install the new sensor: Insert the new ABS wheel speed sensor into the cleaned mounting hole on the wheel hub assembly. Ensure it is aligned correctly and push it in until it sits flush.
  9. Secure the sensor: Reinstall the mounting bolt and tighten it to the manufacturer's specified torque setting. Make sure it is securely fastened.
  10. Connect the electrical connector: Reconnect the electrical connector to the new sensor, ensuring a secure connection. If there were any retaining clips or screws, reinstall them as well.
  11. Reinstall the tire: Place the tire back onto the hub assembly and hand-tighten the wheel nuts. Lower the vehicle slowly until the tire touches the ground and then tighten the nuts using a lug wrench in a star pattern.
  12. Test the ABS system: Start the engine and test the ABS system by driving the vehicle. Ensure the ABS warning light on the dashboard is not illuminated and that the brakes operate smoothly.
  13. Double-check: After a short drive, inspect the new sensor for any signs of rubbing or interference with other components. Make sure all connections are secure.

Remember to consult the vehicle's service manual for detailed instructions specific to your Volvo 960 model. If you're uncertain or uncomfortable performing this task yourself, it's recommended to seek professional assistance from a certified mechanic or Volvo service center.

Top Volvo 960 ABS Wheel Speed Sensor Brands for Sale

Genuine Volvo is a renowned manufacturer of ABS wheel speed sensors for the Volvo 960 model. As the vehicle manufacturer, Volvo maintains strict quality standards for all its genuine parts, ensuring that they meet the highest original equipment quality. These branded parts are exclusively produced by trusted auto parts manufacturers chosen by Volvo. The advantage of opting for Genuine Volvo ABS wheel speed sensors is their unparalleled reliability and compatibility with the 960 model. Customers can have confidence in the durability and performance of these parts, knowing that they have been designed and manufactured specifically for their vehicle. However, it's important to note that due to their association with the vehicle manufacturer's brand, Genuine Volvo parts tend to be more expensive compared to alternative options. Nevertheless, the superior quality and peace of mind they offer make them a preferred choice for many Volvo owners.

Find Great Deals on Volvo 960 ABS Wheel Speed Sensor

At AutohausAZ, you can enjoy the convenience of shopping for a Volvo 960 ABS wheel speed sensor without worrying about additional costs. With their vast selection of automotive parts, finding the right sensor for your vehicle becomes hassle-free. AutohausAZ offers competitive prices, ensuring that you get the best value for your money. Their commitment to quality means that you can rely on their products to meet or even exceed your expectations. Additionally, AutohausAZ provides excellent customer service, making your shopping experience smooth and pleasant. You can easily navigate their user-friendly website to find the exact part you need, saving you time and effort. When it comes to purchasing a Volvo 960 ABS wheel speed sensor, AutohausAZ is the ideal destination for all your automotive needs.

Auto Parts We Offer for Volvo 960