BMW 428i Tail Light Parts
Showing 7 out of 7 part(s) found in our catalog.
Brand
Keyword
Category
Select category below to view parts.
Mon-Fri 8-4 MST/PST (Arizona Time)
BMW 428i tail light typically cost between $7.89 and $228.99.
What Causes BMW 428i Tail Light To Stop Working?
If your BMW 428i tail light isn’t working, the typical culprit is a burnt-out bulb. Faulty fuses are also a frequent cause and can easily be checked and swapped out. In some cases, a loose or corroded connector is to blame—often after water sneaks past a worn seal or gasket. Less obvious, but not uncommon, are issues with the wiring harness or a malfunctioning light control module. Sometimes it’s a quick fix, but if the problem keeps coming back, tracing it with a multimeter or having a mechanic take a closer look can help pinpoint what’s going on.
How Do I Replace BMW 428i Tail Light?
Changing a BMW 428i tail light isn’t as complicated as it seems. Start by opening the trunk and peeling back the interior trim so you can reach the tail light assembly. You’ll usually find some nuts or screws holding it in place—take these out, then gently unplug the wiring connector. If you’re just swapping a bulb, twist out the old bulb socket, pop in a fresh one, and reinstall. Once everything’s put back, reconnect the harness and secure it in place. Before you button it up, flip on your lights to check that everything’s working.
Which Bulb Size Fits BMW 428i Tail Light?
For the BMW 428i tail light, the bulb size can vary depending on the year and whether you’re replacing the inner or outer lamp. Most often, you’ll see sizes like 1156 or 1157, but BMW changes specs between models and versions. Your safest bet is to check the owner’s manual or the old bulb, or ask a parts counter to look it up by your car’s VIN. Models with LED tail lights are a bit trickier, since the LEDs are usually built into the assembly—if an LED goes out, the whole unit typically needs replacement.
Are Aftermarket BMW 428i Tail Lights Reliable?
Aftermarket options for the BMW 428i tail light are hit or miss. Some are built to high standards and fit or perform just like the originals; others can be a headache with issues like leaks, imperfect fit, or dim bulbs. Reading reviews can help weed out the poor-quality choices, and picking a reputable brand makes all the difference. OEM parts are the safest way to guarantee a perfect match, but there are some aftermarket lights out there that are just as dependable—just be sure to double-check compatibility for your specific BMW.
Why Does Water Leak Into BMW 428i Tail Light?
It’s never fun to find water inside your BMW 428i tail light. More often than not, it’s due to wear and tear on the tail light seals, which lets water sneak in after rain or a car wash. Sometimes it’s a small crack in the lens or an assembly that was never sealed quite right in the first place. Moisture can fog up the inside of the lens and even corrode bulbs or electrical contacts. Fixing this usually means replacing the faulty seal or, if the leak persists, swapping out the whole assembly to keep things dry.
Need A BMW 428i Tail Light Without The Hassle?
At AutohausAZ, we make tracking down a BMW 428i tail light quick and hassle-free. You’ll find quality options at a fair price, and shipping is speedy so you’re not left waiting. If something’s not right, our return process is straightforward and simple. No confusing catalogs or runaround—just the right part delivered when you need it.
