BMW Z4 Brake Pad Sensor Parts
Showing 20 out of 20 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
The average cost of a BMW Z4 brake pad sensor is between $4.89 and $30.99.
The BMW Z4 brake pad sensor is a component used in the braking system of the BMW Z4 vehicle. It is designed to detect the wear of the brake pads and provide a warning signal to the driver when they need to be replaced. The sensor measures the thickness of the brake pad material, and when it reaches a certain minimum threshold, it triggers a warning light on the dashboard. This allows the driver to be aware that the brake pads are nearing the end of their lifespan and need to be replaced to maintain optimum braking performance and safety.
The BMW Z4 typically has two brake pad sensors, one for the front brakes and one for the rear brakes. These sensors are designed to detect when the brake pads wear down to a certain level and send a signal to the vehicle's onboard computer to indicate that the brake pads need to be replaced.
Replacing Brake Pad Sensors On A BMW Z4
To replace a brake pad sensor on a BMW Z4, follow these steps:
- Gather the necessary tools and parts: You will need a jack, jack stands, lug wrench, socket set, new brake pad sensor, and possibly a flathead screwdriver.
- Park your vehicle on a flat surface and engage the parking brake.
- Loosen the wheel lug nuts on the wheel where you will be replacing the brake pad sensor. Do not remove them yet.
- Locate the jack points under the car. Refer to the owner's manual for their precise location. Use the jack to lift the front or rear of the car, depending on which brake pad sensor you are replacing. Ensure that the vehicle is securely supported on jack stands.
- With the wheel raised off the ground, remove the lug nuts and take off the wheel.
- Inspect the brake caliper to locate the brake pad sensor. It is a small wire connected to the brake pad. Identify how the sensor is attached to the brake pad, as it can vary depending on the model year.
- Disconnect the sensor connector from the wiring harness. Some sensors may have a plug connection, while others may require cutting and splicing the wires. If necessary, carefully use a flathead screwdriver to release any retaining clips.
- Remove any clips or fasteners attaching the sensor wire to the brake caliper or other components. Take note of their positions for reinstallation later.
- Gently remove the brake pad sensor from the brake pad. Be cautious not to damage the brake pad or surrounding components.
- Compare the old sensor with the new one to ensure they are identical in shape and length.
- Install the new brake pad sensor into the brake pad, making sure it fits securely.
- Reattach any clips or fasteners that hold the sensor wire in place according to their original positions.
- Reconnect the sensor connector to the wiring harness. If you had to cut and splice wires, make proper connections using appropriate connectors or soldering.
- Remount the wheel onto the vehicle and hand-tighten the lug nuts.
- Use the jack to lower the car back to the ground.
- Fully tighten the lug nuts using a lug wrench in a star pattern. Refer to the car's specifications for the appropriate torque value.
- Repeat these steps for each brake pad sensor you need to replace.
Note: After replacing the sensor, you may need to reset the brake pad warning light using an OBD-II diagnostic tool or by following the specific procedure mentioned in the BMW Z4 owner's manual.
Top BMW Z4 Brake Pad Sensor Brands for Sale
Bowa:
Bowa is a reputable manufacturer of brake pad sensors for the BMW Z4. They specialize in producing high-quality automotive components and have gained recognition for their attention to detail and precision engineering. Bowa brake pad sensors are known for their durability and reliability, ensuring accurate detection of brake pad wear. Although not branded under the Genuine BMW name, Bowa maintains a commitment to producing parts that meet or exceed the original equipment quality standards.
Genuine BMW:
As the name suggests, Genuine BMW brake pad sensors are manufactured directly by the vehicle manufacturer or by auto parts manufacturers chosen specifically by BMW. These parts are held to the highest quality standards set by BMW, guaranteeing maximum compatibility and performance. Genuine BMW brake pad sensors are synonymous with original equipment quality, ensuring optimal functionality and safety. While they may be the most expensive option, they provide peace of mind due to their unmatched precision and reliability.
Sadeca:
Sadeca is another notable manufacturer of brake pad sensors for the BMW Z4. With a focus on producing high-quality components, Sadeca has established itself as a trusted supplier in the automotive industry. Sadeca brake pad sensors are designed to meet or exceed OEM specifications, providing excellent performance and accuracy in detecting brake pad wear. Although not directly affiliated with BMW, Sadeca delivers reliable and cost-effective alternatives to the Genuine BMW branded parts, making them a popular choice among BMW enthusiasts.
When considering brake pad sensors for your BMW Z4, it's crucial to weigh factors like quality, compatibility, and budget. Both Genuine BMW and reputable aftermarket manufacturers like Bowa and Sadeca offer reliable options, allowing you to make an informed decision based on your specific needs and preferences.
Find Great Deals on BMW Z4 Brake Pad Sensor
At AutohausAZ, you can find a wide range of BMW Z4 brake pad sensors to cater to your specific needs. With our extensive selection of high-quality options, you can easily ensure the safety and performance of your vehicle's braking system.
One advantage of choosing AutohausAZ is our commitment to sourcing reliable brake pad sensors. Our team meticulously selects products from reputable manufacturers, ensuring that you receive only top-notch components for your BMW Z4. This dedication to quality helps guarantee that your brake pad sensor will accurately detect when it's time to replace your brake pads, allowing you to maintain optimal braking performance and safety on the road.
Additionally, shopping at AutohausAZ means you can enjoy the convenience of finding everything you need in one place. With our comprehensive inventory, you won't need to waste time searching through multiple stores or websites to locate the right brake pad sensor for your BMW Z4. Our user-friendly website makes it easy to navigate and quickly find the product you require, saving you valuable time and effort.
By choosing AutohausAZ, you also benefit from our reliable customer service. Our knowledgeable and friendly team is always ready to assist you with any inquiries or concerns you may have about your purchase. We strive to provide excellent support, ensuring that your shopping experience with us is smooth and hassle-free.
In conclusion, AutohausAZ offers numerous advantages when it comes to shopping for BMW Z4 brake pad sensors. Our commitment to quality, comprehensive inventory, and reliable customer service make us a trusted destination for automotive parts. Ensure the safety of your BMW Z4 by choosing AutohausAZ for all your brake pad sensor needs.
