Porsche 993 Brake Pad Sensor Parts
Showing 7 out of 7 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
The average price of a Porsche 993 brake pad sensor is between $5.49 and $16.39.
A Porsche 993 brake pad sensor is a small yet vital component in the braking system of a Porsche 993 vehicle. Its primary function is to monitor the condition of the brake pads. When the brake pads wear down to a certain point, the sensor is triggered and sends a signal to the vehicle's onboard computer. This then lights up a warning light on the dashboard, alerting the driver that the brake pads are thin and need to be replaced soon. By providing this early warning, the brake pad sensor helps prevent damage to other parts of the brake system and ensures the safe operation of the vehicle.
A Porsche 993 typically has two brake pad sensors. One is located in the front and the other in the rear.
Replacing Brake Pad Sensors On A Porsche 993
- Begin by gathering the necessary tools and safety equipment. This will usually include gloves, protective eyewear, a jack, a wrench, a screwdriver, and of course, the new brake pad sensor.
- It's important to ensure that the car is in a secure position before beginning any work. Use the jack to elevate your Porsche 993 and place wheel blocks on the wheels to ensure it doesn’t move.
- Remove the wheel. Once the car is secure, use the wrench to remove the lug nuts and then take off the wheel.
- Detach the brake caliper. Carefully remove the bolts that are holding the brake caliper in place. Slide the caliper off and hang it up with a piece of wire or a bungee cord, making sure not to stretch or harm the brake line.
- Now you should be able to see the brake pads and the brake pad sensor. Carefully unclip the sensor from the brake pad.
- Take the new sensor and clip it onto the brake pad. Make sure that it is secured properly and that there is no possibility of it coming loose when the brakes are applied.
- Attach the brake caliper back into its original position and screw in the bolts that were removed earlier.
- Put the wheel back on the car and tightly secure the lug nuts. Repeat the process for the other wheels if their brake pad sensors need to be replaced as well.
- Lower the car using the jack and remove the wheel blocks. Before driving, test out your new brake pad sensor by pressing on the brakes while the car is stationary to make sure everything is installed correctly.
- If everything feels correct, your brake pad sensor replacement is complete. However, remember to monitor the performance of your brakes for a short time after any maintenance work. If you do notice anything unusual, consult a professional immediately.
Top Porsche 993 Brake Pad Sensor Brands for Sale
Sebro is a widely recognized manufacturer of automotive parts, which include brake pad sensors. They are renowned for their high-precision production techniques and adherence to the stringent standards of quality within the automotive industry. Their brake pad sensors for Porsche 993 are known for their durability, excellent performance, and efficiency. They are created with meticulous attention to detail to ensure maximum compatibility and functionality. This makes Sebro parts highly sought after by car owners who value top-notch quality and reliability in their vehicle's performance.
On the other hand, Pex is yet another well-regarded brand in the production of brake pad sensors, and their products are noted for their robust design, high resilience, and exceptional service life. Pex designs their sensors to cater to the specific requirements of cars such as the Porsche 993, thus boasting an impressive compatibility ratio. Pex's commitment to technological innovation ensures that their brake pad sensors integrate smoothly into the vehicle's overall braking system, allowing for seamless and effective functioning of the brakes.
Genuine branded parts are manufactured exclusively by the auto parts manufacturers that the vehicle manufacturer decides to work with. The main advantage of going for these parts is the unmatched original equipment quality, which means they will deliver the best possible performance as they adhere strictly to the vehicle manufacturer's quality standards. However, this grade of quality comes at a price, making genuine branded parts the most costly. An example is the Porsche 993 brake pad sensor made by the vehicle manufacturer, which flaunts superior quality but also comes at a premium cost.
Find Great Deals on Porsche 993 Brake Pad Sensor
Shopping at AutohausAZ for a Porsche 993 brake pad sensor comes with various benefits. We pride ourselves on offering exceptional quality parts that are both durable and reliable. With our focus on sourcing only the best, you can always trust that what you're buying will stand the test of time.
Another advantage is the comprehensive selection we provide. We understand that every Porsche 993 owner has unique needs, and so we strive to offer a wide array of choices to accommodate everyone. You won't need to worry about limiting options with us, as our catalogue is diverse and extensive.
Moreover, we also prioritize affordability. Our competitive pricing means that you can get the brake pad sensor you need without breaking the bank. So, not only are you getting superior quality, but you're also receiving great value for your money.
The convenience we offer cannot be understated. With the ease of online shopping, you're able to browse through our selections and make your purchase right from the comfort of your home. The process is straightforward and eliminates the need for trips to physical stores.
Lastly, customer service is something we value greatly. Our team is ready and willing to assist you throughout your shopping journey, ensuring that it's smooth, enjoyable, and hassle-free.
In conclusion, when you choose to shop for your Porsche 993 brake pad sensor with us, you're choosing quality, variety, affordability, convenience, and top-notch customer service.
