BMW 428i Engine Oil Parts
Showing 0 out of 19 part(s) found in our catalog.
Brand
Keyword
Mon-Fri 8-4 MST/PST (Arizona Time)
We didn't find any parts matching your search query.
BMW 428i engine oil is a special type of oil that is recommended by BMW for use in the 428i engine. This oil is designed to provide the necessary lubrication and protection for the engine's moving parts, as well as help maintain its overall performance and efficiency.
Using the correct type of engine oil is important for several reasons. First, it helps to reduce friction between the engine's moving parts, which can help prevent wear and tear and extend the life of the engine. It also helps to remove heat from the engine, which can help prevent overheating and ensure that the engine stays within its optimal temperature range.
In addition, using the right type of engine oil can help improve fuel efficiency and reduce emissions, which are both important considerations in today's environmentally conscious world. Overall, using the correct type of BMW 428i engine oil can help ensure that your vehicle runs smoothly and efficiently for many years to come.
Types of Engine Oil for BMW 428i
- Motul 8100 X-cess gen2: This engine oil is a 100% synthetic formula that is specifically designed for high-performance engines like the BMW 428i. It has a viscosity grade of 5W-40 which makes it suitable for use in extreme temperatures and offers excellent protection against wear, deposits, and oxidation.
- Liqui Moly: Liqui Moly offers a few different types of engine oil for the BMW 428i. Their Synthoil Premium 5W-40 is a fully synthetic oil that provides maximum engine protection with a low ash content. Their Special Tec AA 5W-30 is also a fully synthetic formula, but it's specifically designed for BMW engines with exhaust gas recirculation (EGR) systems.
- Castrol Edge: Castrol Edge offers a few different types of engine oil for the BMW 428i as well. Their 0W-40 formula is a fully synthetic oil that provides excellent wear protection and improved fuel efficiency. Their Titanium FST 5W-30 is another fully synthetic formula that's designed to provide maximum performance in extreme temperatures.
- Total Quartz 9000 Energy: Total Quartz 9000 Energy is a fully synthetic engine oil that's specifically designed for high-performance engines like the BMW 428i. It has a viscosity grade of 5W-40 and is formulated to offer excellent wear protection, improved cold-start performance, and reduced engine deposits.
BMW 428i Oil Capacity
The engine oil capacity for the BMW 428i varies by year, but generally ranges from 6-7 quarts. Here are some specific capacities by year:
- 2014-2016: 6.5 quarts
- 2017-2018: 6.9 quarts
- 2019-2020: 6.6 quarts
Changing the Engine Oil in Your BMW 428i
To change the engine oil in a BMW 428i, follow these steps:
- Warm up the engine: Start the engine and let it run for 5-10 minutes to warm up the oil. This will help the oil flow easily when you drain it.
- Locate the oil drain plug: The oil drain plug is located on the bottom of the engine, in the center. It is a large bolt with a hex head.
- Prepare the tools and materials: You will need an oil filter wrench, a socket wrench, a drain pan, a funnel, a new oil filter, and new engine oil.
- Drain the old oil: Place the drain pan under the drain plug and use the socket wrench to loosen and remove the drain plug. Allow the oil to drain completely.
- Change the oil filter: Use the oil filter wrench to loosen and remove the oil filter. Apply a small amount of oil to the gasket of the new oil filter, and install the new filter.
- Refill the engine with new oil: Use the funnel to pour the new oil into the engine. Refer to your owner's manual for the correct amount and viscosity of oil to use.
- Start the engine: Start the engine and let it run for a few minutes. Check for any leaks around the drain plug and oil filter.
- Check the oil level: Turn off the engine and wait for a few minutes to allow the oil to settle. Check the oil level using the dipstick and add more oil if necessary.
- Dispose of the old oil: Pour the old oil into a container and take it to a recycling center or an auto parts store that accepts used oil.
- Reset the oil change indicator: If your BMW has an oil change indicator, follow the instructions in your owner's manual to reset it.
At AutohausAZ, we understand the importance of keeping your BMW 428i engine oil running smoothly and efficiently. That's why we offer a wide range of engine oils that are specifically designed for BMW vehicles.
Our engine oils are made from high-quality, premium-grade ingredients that provide superior protection against wear and tear, while maintaining optimal performance levels. Whether you're looking for synthetic or conventional oil, we have the perfect solution to meet your needs.
In addition to our high-quality engine oils, we also offer competitive pricing and exceptional customer service. We are committed to providing our customers with the best possible shopping experience, and we work hard to ensure that every customer is satisfied with their purchase.
So if you're in need of BMW 428i engine oil, look no further than AutohausAZ. Our commitment to quality, affordability, and customer service makes us the ideal choice for all of your BMW maintenance needs.
