BMW 740I Fuel Injector Parts
Showing 10 out of 10 part(s) found in our catalog.
Brand
Keyword
Subcategory
Mon-Fri 8-4 MST/PST (Arizona Time)
The average price of a BMW 740I fuel injector is between $3.19 and $2585.88.
A BMW 740i fuel injector is a component of the fuel injection system in a BMW 740i vehicle. It is responsible for delivering fuel into the combustion chamber at the precise moment and in the proper amount. This helps to ensure optimal engine performance, fuel efficiency, and emissions control.
Signs of Faulty or Worn BMW 740I Fuel Injector
A few common signs of faulty or worn-out fuel injectors in a BMW 740i may include:
- Poor Fuel Economy: Decreased gas mileage compared to normal driving conditions.
- Engine Misfires: Unsteady engine operation, rough idling, or stumbling while accelerating.
- Lack of Power: Reduced engine power, especially during acceleration.
- Difficult Starting: Increased difficulty in starting the engine, or the engine taking longer to start.
- Rough Engine Performance: Engine vibrations or shaking during operation.
- Smoky Exhaust: Dark-colored smoke emitting from the exhaust pipe.
- Fuel Odor: Strong smell of gasoline coming from the engine bay or exhaust.
- Engine Stalling: Random engine shutdowns while driving or at idle.
- Check Engine Light: Illumination of the "Check Engine" light on the dashboard.
- Fuel Leaks: Noticeable fuel leaks around the fuel injectors or fuel rail.
Please note that these signs can also be indicative of other issues, so it is always best to have a professional diagnose and inspect the vehicle for accurate diagnosis and repair.
Replacing BMW 740I Fuel Injectors
- Park the vehicle in a well-ventilated area and ensure that the engine is cool.
- Disconnect the negative terminal of the battery to prevent any electrical accidents.
- Relieve the fuel system pressure by locating the fuel pump relay or fuse, and then starting the engine until it stalls.
- Open the hood and locate the fuel rail, which houses the fuel injectors.
- Disconnect the electrical connector(s) from the fuel injector(s) by pressing the locking tab and gently pulling them apart.
- Use a fuel line disconnect tool to remove the fuel line(s) attached to the fuel rail.
- Carefully remove any components obstructing access to the fuel rail, such as intake manifold covers or brackets.
- Loosen and remove the mounting bolts that secure the fuel rail to the intake manifold.
- Gently lift the fuel rail and fuel injectors out of the intake manifold, taking care not to damage any surrounding components.
- Once removed, detach the fuel injector(s) from the fuel rail by removing the retaining clips or nuts.
- Clean the fuel rail and ensure that there are no debris or dirt particles that could affect the new fuel injector's performance.
- Install the new fuel injector(s) into the fuel rail, securing them with the provided retaining clips or nuts.
- Apply a small amount of lubricant to the O-ring(s) on the new fuel injector(s) to ease installation.
- Carefully position the fuel rail back onto the intake manifold, aligning the injector(s) with their respective ports.
- Tighten the mounting bolts on the fuel rail to secure it in place.
- Reconnect the electrical connector(s) to the fuel injector(s), ensuring a secure connection.
- Reattach the fuel line(s) to the fuel rail using the appropriate fuel line disconnect tool.
- Double-check that all connections are secure and properly tightened.
- Reinstall any components that were removed to access the fuel rail, such as intake manifold covers or brackets.
- Reconnect the negative terminal of the battery.
- Turn the ignition key to the "ON" position for a few seconds without starting the engine to allow the fuel system to pressurize.
- Inspect for any fuel leaks around the fuel injector connections or fuel rail.
- Start the engine and verify that it runs smoothly without any issues or abnormal noises.
- Finally, take the vehicle for a test drive to ensure proper operation of the newly replaced fuel injector(s).
Typical Lifespan of BMW 740I Fuel Injectors
A BMW 740I fuel injector typically lasts around 150,000 to 200,000 miles. However, the lifespan can vary depending on various factors such as maintenance, driving conditions, and fuel quality.
Regular maintenance and proper care can help extend the life of the fuel injector.
BMW 740I Fuel Injectors at Discount Prices
When considering purchasing a fuel injector for your BMW 740I, there are multiple advantages to choosing AutohausAZ. First and foremost, they provide a wide selection of high-quality fuel injectors specifically designed for BMW vehicles. Their extensive range ensures that you can easily find the perfect fit for your 740I model.
Additionally, AutohausAZ offers competitive prices on their fuel injectors. By shopping with them, you can take advantage of affordable options without sacrificing quality. This allows you to save money while still getting a reliable and efficient fuel injector for your BMW.
Furthermore, AutohausAZ prioritizes customer satisfaction. They strive to provide excellent service, ensuring that you have a smooth and pleasant shopping experience. Their knowledgeable and helpful staff are available to assist you with any questions or concerns you may have, making the purchasing process easier and more enjoyable.
Lastly, AutohausAZ guarantees the authenticity and reliability of their fuel injectors. When you shop with them, you can be confident in the quality of the product you are receiving. This peace of mind is essential when it comes to automotive parts, as you want to ensure your BMW 740I performs optimally.
In conclusion, shopping at AutohausAZ for a fuel injector for your BMW 740I offers numerous advantages. They boast a wide selection, competitive prices, excellent customer service, and reliable products. By choosing AutohausAZ, you can confidently purchase a fuel injector that meets your needs and enhances the performance of your BMW.
