99760210401 Bremi/STI Ignition Coil
Click the image to expand

Bremi/STI Ignition Coil | 99760210401

Porsche 911, Boxster, Cayman
$33.99
Reg
$35.41
List
$116.73
In Stock Status
In Stock Information Icon
Leaves warehouse within 1-2 business days.
Loading...

Make Sure It Fits

P/N: 99760210401 Bremi/STI
Description:
Now supplying in latst version 99760210404.
Cross References:
  • 20550
  • 99760210403
  • 99760210404
  • 99760210405
  • 99760210406

Ignition coils create the power needed for the spark plug to ignite the air-fuel charge in a gasoline engine's cylinder for combustion. They are induction-style coils that amplify the 12 volts used by your vehicle's electrical system to up to 40 kilovolts needed to make a spark strong enough for complete combustion. Some vehicles use only one or two ignition coils for the entire engine, while others use a single ignition coil for each cylinder or sometimes two.

Failed or failing ignition coils, even if producing voltage, may not be strong enough, causing a weak spark or no spark to the cylinders. When this happens, it can cause one or all the cylinders in your Porsche to misfire, making the engine run rough, if at all.

Replacing the Ignition Coils in Your Porsche

When replacing an ignition coil in your Porsche, whether as part of maintenance or due to a failed ignition coil, it is a good idea to replace any other connected ignition components. For engines that use a distributor, you should replace the distributor cap, distributor rotor, ignition wires, and spark plugs along with the ignition coil. For engines with a single ignition coil per cylinder or a single ignition coil for every two cylinders, you should replace the ignition wires or boots and spark plugs with the ignition coils. Additionally, it is always recommended to replace all the ignition coils simultaneously.

View more Porsche Ignition Coils.

Left = Driver side and Right = Passenger side.
All parts are priced individually unless identified as a set or kit. "Per car" notes identify how many of a given part your car has and "Left/Right or Front/Rear" notes means the part fits the left or right side of the car. These parts are still sold individually and you'll need to select the appropriate quantity if you plan to replace more than one of this item.

Frequently Viewed Together

We found 10 additional part(s) that are frequently viewed together.

Why Buy OEM & Genuine Replacement Auto Parts from AutohausAZ?

Auto parts at wholesale prices is what you will find at AutohausAZ. Have you been searching the web for auto parts for your vehicle? You have come to the right place! Here at Autohaus, we strive to offer low prices on quality replacement parts and providing first rate customer service.

What This Bremi/STI Ignition Coil Fits?

Application information below is for reference only and should not be used to determine the exact vehicle fitment. Please use the "Make Sure It Fits" vehicle selection box above to determine the exact fitment and review any application notes. If you need any help determining if this part works with your vehicle, please don't hesitate to contact us.

Porsche
01-11 - 911 40th Anniversary Edition, Carrera, Carrera 4, Carrera 4S, Carrera S & more
Original design with 15 mm long bolt tabs, (uses 6 X 25 mm hold down bolts). When replacing original coils with updated design (997 602 104 02), longer hold down bolts will be necessary. Also use (Qty.) (2) 900 385 025 01 bolts (6 X 40 mm) for each coil.
Original design with 15 mm long bolt tabs, (uses 6 X 25 mm hold down bolts). When replacing original coils with updated design (997 602 104 04), longer hold down bolts will be necessary. Also use (Qty.) (2) 900 385 025 01 bolts (6 X 40 mm) for each coil.
Updated design with 31 mm long bolt tabs, (requires 6 X 40 mm hold down bolts). (2) 6 X 40 mm bolts are included with each coil.
05-08 - Boxster Base, Limited Edition, RS 60 Spyder, S, S Limited Edition
Original design with 15 mm long bolt tabs, (uses 6 X 25 mm hold down bolts). When replacing original coils with updated design (997 602 104 02), longer hold down bolts will be necessary. Also use (Qty.) (2) 900 385 025 01 bolts (6 X 40 mm) for each coil.
Original design with 15 mm long bolt tabs, (uses 6 X 25 mm hold down bolts). When replacing original coils with updated design (997 602 104 04), longer hold down bolts will be necessary. Also use (Qty.) (2) 900 385 025 01 bolts (6 X 40 mm) for each coil.
Updated design with 31 mm long bolt tabs, (requires 6 X 40 mm hold down bolts). (2) 6 X 40 mm bolts are included with each coil.
06-08 - Cayman Base, S
Original design with 15 mm long bolt tabs, (uses 6 X 25 mm hold down bolts). When replacing original coils with updated design (997 602 104 02), longer hold down bolts will be necessary. Also use (Qty.) (2) 900 385 025 01 bolts (6 X 40 mm) for each coil.
Original design with 15 mm long bolt tabs, (uses 6 X 25 mm hold down bolts). When replacing original coils with updated design (997 602 104 04), longer hold down bolts will be necessary. Also use (Qty.) (2) 900 385 025 01 bolts (6 X 40 mm) for each coil.
Updated design with 31 mm long bolt tabs, (requires 6 X 40 mm hold down bolts). (2) 6 X 40 mm bolts are included with each coil.