11341739820 Febi-Bilstein Intake Valve; 33.0mm x 6.0mm Stem
Click the image to expand

Febi-Bilstein Intake Valve; 33.0mm x 6.0mm Stem | 11341739820

BMW 328i, 325i, M3, 528i, Z3, 525i, 325is, 318i, 323i, 318ti & more
$7.99
Reg
$8.32
List
$47.40
In Stock Status
In Stock Information Icon
Leaves warehouse within 1-2 business days.
Loading...

Make Sure It Fits

P/N: 11341739820 Febi-Bilstein
Description:
33.0mm x 6.0mm Stem
Cross References:
  • 11341738218
  • 11341739822
  • 11960
  • 12823
  • 50004608
  • W01331634680

The engine intake valves on your BMW open to allow fuel and air to enter the engine cylinders for engine combustion. They function by being held closed flush to a seat on the underside of the cylinder head with a spring pulling upward. When the cylinder needs fuel and air, a rocker arm pushes the valve open. Once the rocker arm releases the valve, the spring pulls the valve closed again so no fuel or air can escape the cylinder for compression and combustion.

Carbon build up on the intake valves can cause them to not seat properly in the cylinder head. This results in air and fuel leaking past the valve during engine compression and combustion. Worn valve springs can cause the valve to not hold closed tightly or make the valve “float” and open during combustion causing the engine to lose power.

Improperly timed engines along with broken timing belts or chains can cause the engine pistons to collide with the intake valves, bending them and causing them to stick or get stuck. Worn or broken rocker arms can also wear and bend the valve stem inside the cylinder head causing them to stick.

Replacing Your BMW Intake Valve
Replacement of the intake valves requires removal of the cylinder head. Special tools are needed to release the valve from the springs, remove the valve keepers between the valve and spring, and remove the valves. Valve seats in the cylinder head must be inspected and may need to be recut prior to installing new intake valves to ensure proper valve seating. Replacement of valve springs, valve keepers, rocker arms, rocker arm shaft, cam followers, and pushrods (if equipped) are highly recommended to be replaced along with intake valves to ensure the new valves function properly and the engine runs at maximum efficiency.

View more BMW Intake Valves.

Since 1844, Febi has been manufacturing parts in Germany. From tie rods to control arms to cylinder head bolts, Febi offers over 37,000 OE quality replacement parts at an affordable price. Whether you are a DIYer or a professional, the quality and reliability of Febi Bilstein products are made for your next repair.
Left = Driver side and Right = Passenger side.
All parts are priced individually unless identified as a set or kit. "Per car" notes identify how many of a given part your car has and "Left/Right or Front/Rear" notes means the part fits the left or right side of the car. These parts are still sold individually and you'll need to select the appropriate quantity if you plan to replace more than one of this item.

Frequently Viewed Together

We found 10 additional part(s) that are frequently viewed together.

Why Buy OEM & Genuine Replacement Auto Parts from AutohausAZ?

Auto parts at wholesale prices is what you will find at AutohausAZ. Have you been searching the web for auto parts for your vehicle? You have come to the right place! Here at Autohaus, we strive to offer low prices on quality replacement parts and providing first rate customer service.

What This Febi-Bilstein Intake Valve Fits?

Application information below is for reference only and should not be used to determine the exact vehicle fitment. Please use the "Make Sure It Fits" vehicle selection box above to determine the exact fitment and review any application notes. If you need any help determining if this part works with your vehicle, please don't hesitate to contact us.

BMW
94-98 - 318i
92-93 - 318i E30, E36
For models with production date from 9/1992.
94-97 - 318iC
92-92 - 318iC E30
For models with production date from 9/1992.
94-97 - 318is
92-93 - 318is E36
For models with production date from 9/1992.
95-99 - 318ti E36
00-00 - 323Ci
99-00 - 323i E46
00-00 - 323i Sport Wagon
98-99 - 323iC E36
98-99 - 323is E36
94-95 - 325i
92-93 - 325i E36
For models with production date from 9/1992.
94-95 - 325iC
93-93 - 325iC
For models with production date from 9/1992.
94-95 - 325is
92-93 - 325is E36
For models with production date from 9/1992.
00-00 - 328Ci