Click the image to expand

VictorReinz Valve Cover Gasket; Profile Gasket | 11127565286

BMW 535i, 335i, Z4, 740i, 535i xDrive, 335i xDrive, X6, 128i, 335xi, 135i & more
In Stock Status
In Stock Information Icon
Leaves warehouse within 1-2 business days.

Make Sure It Fits

P/N: 11127565286 VictorReinz OEM
Profile Gasket
Cross References:
  • 713936600
  • 740.210
  • W01331796716

The valve cover gaskets seal the upper engine valve cover to the cylinder head to keep in oil and keep out dirt and debris. Valve cover gaskets may be a single piece or multiple pieces and can be made from rubber, cork, silicone, liquid silicone, or a combination of these. Depending on the valve cover design, the valve cover gasket may seal only the outer edge of the valve cover to the cylinder head or the valve cover to the outer edge and inner spark plug chambers in the cylinder head.

Signs of a Faulty Valve Cover Gasket

Valve cover gaskets fail when they allow engine oil to leak from the valve cover to the engine's exterior or into the spark plug chambers. Leaking oil can saturate and degrade vacuum, coolant, and air intake hoses, cause electrical components to short or ground out, and can foul spark plugs.

Oil stains underneath your BMW, engine smoking when running or after being turned off, cylinder misfires, and engine oil consumption are all signs of an oil leak. If you notice any of these symptoms, you should thoroughly inspect the valve cover to see if oil is leaking from it.

Replacing Your BMW Valve Cover Gasket

When replacing valve cover gaskets, it is vital to clean the mating surfaces of the valve cover and cylinder head before installing new gaskets and reinstalling the valve cover to prevent new leaks. Removing and cleaning the spark plugs or changing them is also wise to prevent oil-fouled spark plug misfires.

View more BMW Valve Cover Gaskets.

As an original equipment manufacturer and replacement part supplier, Dana/Victor Reinz offers the highest quality sealing technologies. All products across the line meet the high standards of OEM quality.
Left = Driver side and Right = Passenger side.
All parts are priced individually unless identified as a set or kit. "Per car" notes identify how many of a given part your car has and "Left/Right or Front/Rear" notes means the part fits the left or right side of the car. These parts are still sold individually and you'll need to select the appropriate quantity if you plan to replace more than one of this item.

Frequently Viewed Together

We found 10 additional part(s) that are frequently viewed together.

Why Buy OEM & Genuine Replacement Auto Parts from AutohausAZ?

Auto parts at wholesale prices is what you will find at AutohausAZ. Have you been searching the web for auto parts for your vehicle? You have come to the right place! Here at Autohaus, we strive to offer low prices on quality replacement parts and providing first rate customer service.

What This VictorReinz Valve Cover Gasket Fits?

Application information below is for reference only and should not be used to determine the exact vehicle fitment. Please use the "Make Sure It Fits" vehicle selection box above to determine the exact fitment and review any application notes. If you need any help determining if this part works with your vehicle, please don't hesitate to contact us.

11-11 - 1 Series M
08-08 - 128i
09-10 - 135i
08-08 - 135i
The correct tool needed to remove ground connection during a valve cover removal is #27971.
07-10 - 335i
10-10 - 335i xDrive
09-09 - 335i xDrive
The correct tool needed to remove ground connection during a valve cover removal is #27971.
11-12 - 335is E9X
13-13 - 335is E9X
The correct tool needed to remove ground connection during a valve cover removal is #27971.
07-08 - 335xi
08-10 - 535i
09-10 - 535i xDrive
08-09 - 535xi
11-13 - 740i
11-13 - 740Li
08-10 - X6 xDrive35i
09-12 - Z4 sDrive35i, sDrive35is
12-16 - Z4 sDrive35i, sDrive35is
The correct tool needed to remove ground connection during a valve cover removal is #27971.